Setup guide

10
Optiplex 790 chassis –EI21 series systems
Move the network interface card (NIC) to the second slot from the left, then install the STR-CTRL in the fourth slot from the left.
Original expansion card conguration Suggested conguration with STR-CTRL controller
NIC
NIC
STR-CTRL
Optiplex 7010 chassis – EH22 series systems
In the EH2204 system, move the NIC in the forth slot from the left to slot 1, then install the STR-CTRL in the fourth slot from the left.
EH2204 original expansion card conguration EH2204 Suggested conguration with STR-CTRL controller
NIC
STR-CTRL
In EH2208 and EH2216 systems, remove the NIC in the forth slot from the left, then install the STR-CTRL into that slot. If the NIC is needed, it can replace the analog audio card in slot 1, or the I/O card in
slot 2.
EH2208, EH2216 original expansion card conguration EH2208. EH2216 suggested congurations with STR-CTRL controller
NIC
STR-CTRL
NIC
STR-CTRL STR-CTRL
System without NIC – or – System without I/O card – or – System without audio card