BT Infrared Ear Thermometer Instruction Manual ©2012 digiO2 International Co., Ltd. All rights reserved. www.digio2.
Table of Contents Foreword ．Foreword ... page02 Dear Customers ．Precautions ... page03 You have purchased a BT Infrared Ear Thermometer, one of the ．Before using the thermometer ... page04 ．Inserting the thermometer into the ear ... page05-06 ．1. Introduction ... page07 1.1 Features ．2. Important Safety Instructions ... page08 most technologically advanced yet easy to use products available in the marketplace today.
Precautions Before Using the Thermometer 1. Precision components were used in the construction of this Caution Keep this device out of the reach of children. A child may swallow the probe cover while playing with it. If a child should swallow it, seek medical treatment immediately. device. Extremes in temperature, humidity, direct sunlight, shock or dust should be avoided. 2. Clean the device with a dry, soft cloth or cloth moistened in alcohol. Never use thinner, benzine or cleaner with abrasives. 3.
Inserting the Thermometer into the Ear Caution Do not force the thermometer into your ear. ■ Insert the thermometer straight into the ear canal. Pull the ear lightly backward to straighten the ear canal. While pulling on the ear, insert the probe tip gently into the ear canal. Never force the thermometer into the ear. If the ear canal is very small, as with a baby, lightly press the probe tip to the ear canal with just enough force to seal the opening around the probe.
1.Introduction 2.Important Safety Instructions The BT Infrared Ear Thermometer is infrared thermometer intended for the intermittent measurement of human body temperature in people of all ages. The three color backlight alert allows users to make quick judgment. The 30-memory recall with date and time display easily manage your long-term body temperature records. 1. Observe the operating conditions described in the 1.
3.Package content 4.
5.Set up After inserting the battery, you will see the screen as below, and the system will enter option mode automatically. 5.1. How to operate : Set the year, date, time and temperature warning level according to the instructions. 5.1.1 “Year”(Default year 2011): Press “MEASURE” to change the number, and press “MENU” to finish the setting. 5.1.2 “Date”(Default Jan. 1st): Press “MEASURE” to change the date and press “MENU” to finish the setting. 5.1.
‧If the measurement is between the lower level (98.9°F (37.2°C)) and the higher warning level (100.9°F(38.2°C)), the screen backlight shows Yellow and the device sounds one short beep. ‧If the measurement is greater than the higher warning level 101°F(38.3°C) , the screen backlight shows Red and the device sounds 1 long and 2 short beeps. 5.2.3 Delete records: Remove the batteries. Press “MENU” and then insert batteries. Keep pressing “MENU” until batteries inserted and the backlight is on.
6.Trouble shooting 7.Replacing the Batteries 6.1 The screen displays “LO”� The measured temperature is less than 34˚C(93.2˚F) Caution Keep the thermometer out of the reach of children. A child may swallow the battery while playing with it. If a child should swallow the battery, seek medical treatment immediately. 6.2 The screen displays “HI”� The measured temperature is greater than 43˚C(109.4 ˚F) 6.
8.Specifications Notes Model Name BT Infrared Ear Thermometer Model Number ETH-102 Accuracy ±0.2˚C (0.4˚F) ：36˚C ~ 39˚C (96.8˚F ~ 102.2˚F) 1. When the LOW BATTERY mark appears in the display, replace all batteries with new ones. Do not mix old and new batteries. Doing so could shorten the battery life or cause the device to malfunction. 2. Battery life varies with the room temperature and may be shorter at low temperatures. Generally, more than 3000 measurements can be performed using new batteries.
Guidance and manufacturer’s declaration-electromagnetic immunity The ETH-102 is intended for use in the electromagnetic environment specified below. The customer or the user of the ETH-102should assure that it is used in such an environment. Immunity test IEC 60601 Compliance level test level Electromagnetic environment-guidance Electrostatic discharge(ESD) + 6 kV contact + 6 kV contact IEC 61000-4-2 + 8 kV air + 8 kV air Floors should be wood, concrete or ceramic tile.
Guidance and manufacturer’s declaration-electromagnetic immunity The ETH-102 is intended for use in the electromagnetic environment specified below. The customer or the user of the ETH-102 should assure that is used in such and environment.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
