Instruction manual

-5--4-
JUNCTION BOX INSTALLATION TYPES VANDAL DOME FITTINGS
a. 2S Fitting requires only 2pcs of base
attachment screws.
Note: You have a reduced space in which
to hide cables using this type of
installation. Recommended for indoor
dome only.
Note: All plate ttings are put so screw holes
show the countersunk cutouts. Camera
base mount ts into the
a. 4S Fitting required 4pcs of base attachment
screws.
Note: A 4S junction box provides the most
robust tting of a camera to a junction
box. Suitable for both indoor and vandal
domes.
a. Octagon Box requires only 2pcs of base
attachment screws.
Note Screws used for the octagon box are
larger compared to those used for the
2S/4S (M4 type). Suitable for both
indoor and vandal domes
2S Fitting
Cable
Entry
4S Fitting
Cable
Entry
Octagon Box
Cable
Entry
Screws
Screws
Screws
Pendant Cap - model # MNTV2XPC
Replaces the need for the camera base.
Compatible with ceiling conduit installations
Pole Mount - model # MNTV2XPJunction Box Accessory - model # MNTV2XJ
Fits either wall mount and corner mount bracket.
Symmetrical so reversible for top or bottom
conduit.
Corner Mount bracket - model # MNTV2XR
Can t either Wall Bracket or Junction Box.
Pendant Mount - model # MNTV2XC
Wall Mount - model # MNTV2XW