Instruction manual

-11--10-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY&NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
1. LENS DC
LENS •DCorMANUAL(ModelDPD23D)
EXPOSURE •SHUTTER•AGC•SENS-UP•BLC•D-WDR•RETURN
WHITEBAL •AWB•ATW•AWCSET•OUTDOOR•INDOOR•MANUAL
DAY&NIGHT•AUTO•COLOR•B/W(notonModelDPV24TLX)
3DNR •OFF•ON
SPECIAL •CAMTITLE•D-EFFECT•MOTION•PRIVACY
 •SYNC•LANGUAGE
ADJUST •SHARPNESS•MONITOR•OSDCOLOR
RESET •FACTORY•RETURN
MENU TREE SUMMARY
• NOTE
The brightness level can be adjusted within
the range of 0 - 100. Default setting - 50
With Model DPD23D DC Lens setting is MANUAL
The EXPOSURE menu is used to set the automatic
light control method for the camera.
1. Highlight 'EXPOSURE' in the main setup menu
2. Press the joystick to access the exposure setup menu.
EXPOSURE
Using this function, you can control screen brightness.
1. Highlight 'LENS' in the main setup menu
2. Press the joystick to access the DC lens setup menu.
3. After completing setting update, highlight 'RETURN' to save setting and return to previous menu
SHUTTER : Select the shutter mode. (1/60, FLK - 1/100,000 sec, x2 - 256)
Default setting is 1/60
AGC: Auto gain control (LOW / MIDDLE / HIGH)
Default setting is MIDDLE
LENS
SETUP
1. LENS DC
2. EXPOSURE
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
EXPOSURE
 
AGC MIDDLE
SENSE-UP AUTO
BLC OFF
D-WDR OFF
RETURN RET
LENS

RETURN RET
1. Press down on the function joystick to access the setup menu.
• Main setup menu is displayed on the monitor screen.
2. Select a function by moving the joystick up and down and move left or right to change
setting value and press joystick to conrm selection.
3. If a menu option features a ' ', a sub menu is available which can be accessed by pressing
down on the joystick
4. Once nished updating settings, highlight 'EXIT' and press down on the joystick
to exit setup menu
Menu Setup
OSD function joystick. Pressing down
on joystick acts as ENTER function.
RCA Service Connector
Use supplied RCA - BNC cable
If you require BNC output.