Instruction manual

-3-
Indoor Dome package contains the following:
Camera in housing ---------------------------------1
Camera Locking screws (PA3 Type) -----------2
Instruction guide (This Document) -------------1
Surface & Flush Mounting Templates----------2
RCA - BNC test cable ------------------------------1
Junction Box Plate ----------------------------------1
Mounting screw pack ------------------------------1
Vandal Dome package contains the following:
Camera in housing ---------------------------------1
Camera Locking screws (PM4 Type) ----------3
Instruction guide (This Document) -------------1
Surface Mounting Template ----------------------1
RCA - BNC test cable ------------------------------1
Junction Box Plate ----------------------------------1
Mounting screw pack ------------------------------1
Tamper allen key ------------------------------------1
Conduit Key ------------------------------------------1
Indoor dome to standard 2S, 4S and Octagon junction
boxes.
NOTE: Flush side of junction box plate should be attached
to junction box
Junction Box Fitting plate ------------------------1
2S / 4S plate screws (KM3.5 Type) ------------4
-------------2
Base Fitting Screws PWM3 ----------------------3
JUNCTION BOX PLATE
Screw hole overview
Base Fitting
Screws
88.9 mm
3.5 in
83.3 mm
3.28 in
46.0 mm
1.8 in
Base Fitting
Screw.
Octagon
Screw
2S / 4S
Screw
Locking
Screw
Conduit
Key
Allen Key
Mounting Screws Pack.
3pc 70mm / 2.8in Screws
3pc 30mm / 1.2in Screws
3pc 40mm 1.6in plugs
-2-
MEASUREMENTS
Vandal Dome Dimensions Base hole positions
Ø 0.1"
3.5 mm
3.9"
100.0 mm
3.4"
87 mm
115 mm
4.5 in
137°
123°
100°
7 mm
.28 in
Underside Base hole positions
Indoor Dome Dimensions
3/4’’ -14
NPS thread
4.4"
(112 mm)
5.1"
(130 mm)
112 mm
4.4 in
5.1"
130 mm
Indoor Dome Flush Mount
Fitting dimensions
39 mm
1.5 in
27 mm
1.1 in
Flush Mount Cutout
and Fitting Clearance