Instruction manual
-17--16-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
The DAY/NIGHT menu is used to congure the day and night related settings for the camera.
1. Highlight 'DAY&NIGHT' in the main setup menu
2. Move the the joystick left/right to change setting to AUTO/COLOR/ B/W
3. Press the joystick to access the submenu's for AUTO and B/W settings
DAY/NIGHT
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and
white. Press joystick to turn ON or OFF
the burst signal in B/W mode.
AUTO : The mode is switched to ‘Color ’ in a normal
environment, but switches to ‘B/W’ mode
when ambient illumination is low. To set up
the switching time or speed for AUTO mode,
press the joystick.
You can now set the Delay in seconds
for the Day - Night and the Night - Day
transitions.
DAY&NIGHT AUTO
D
N
RETURN RET
BURST OFF
RETURN RET
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL
4. DAY&NIGHT
AWB
AUTO
This function reduces the background noise in a low luminance environment.
1.Highlight '3DNR' in the main setup menu.
2. Move the the joystick left/right to change setting to OFF/ON
OFF - Noise is not reduced
ON - Noise is reduced
3. Press the joystick to access the submenu for ON setting.
In the 3DNR submenu you can adjust the noise reduction level values range
from 0 to 100. Default setting is 60.
Digital Noise Reduction (3D DNR)
• Noise levels can be very subtle, and may not be always noticable on adjusting
• When adjusting the noise reduction level in 3DNR submenu, remember that the
higher the level set, the more the noise level will be reduced, however this can
have a softening effect on the image.
Notes
RETURN RET
SETUP
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
4. DAY&NIGHT
AWB
AUTO
5. 3DNR
ON