Instruction manual

-7--6-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. 3DNR ON
5. SPECIAL
6. ADJUST
7. RESET
8. EXIT
1. LENS MANUAL
LENS •MANUAL
EXPOSURE •SHUTTER•AGC•SENS-UP•BLC•D-WDR•RETURN
WHITEBAL •AWB•ATW•AWCSET•OUTDOOR•INDOOR•MANUAL
3DNR •OFF•ON
SPECIAL •CAMTITLE•D-EFFECT•MOTION•PRIVACY
 •SYNC•LANGUAGE
ADJUST •SHARPNESS•MONITOR•OSDCOLOR
RESET •FACTORY•RETURN
MENU TREE SUMMARY
The EXPOSURE menu is used to set the automatic
light control method for the camera.
1. Highlight 'EXPOSURE' in the main setup menu
2. Press ENTER to access the exposure setup menu.
EXPOSURE
Using this function, you can control screen brightness.
1. Highlight 'LENS' in the main setup menu
2. Press the ENTER to access the DC lens setup menu.
3. After completing setting update, highlight 'RETURN' to save setting and return to previous menu
SHUTTER : Select the shutter mode. (1/60, FLK - 1/100,000 sec, x2 - 256)
Default setting is 1/60
BRIGHTNESS: The brightness level can be adjusted within
the range of 0 - 100. Default setting - 50
AGC: Auto gain control (LOW / MIDDLE / HIGH)
Default setting is MIDDLE
LENS
SETUP
1. LENS MANUAL
2. EXPOSURE
SETUP
1. LENS MANUAL
2. EXPOSURE
3. WHITE BAL AWB
EXPOSURE
SHUTTER AUTO
 
AGC MIDDLE
SENSE-UP AUTO
BLC BLC
D-WDR OFF
RETURN RET
1. Press ENTER on the function buttons to access the setup menu.
• Main setup menu is displayed on the monitor screen.
2. Select a function by pressing up and down and move left or right buttons to change
setting value and press ENTER to conrm selection.
3. If a menu option features a ' ', a sub menu is available which can be accessed by pressing
the ENTER button
4. Once nished updating settings, highlight 'EXIT' and press ENTER to exit setup menu
Menu Setup
OSD function controls.
Pressing down on middle button
acts as ENTER function.
Service Connector output.
Use supplied cable to connect to this
output.