Instruction manual

Resetting to Factory Defaults

9. RESETTING TO FACTORY DEFAULTS

Follow the steps below to revert all settings to factory defaults. The camera

must be connected to power to perform a factory reset.

1.Loosen the three tamper screws

using the provided allen key. Lift the

dome c

over.

2.Remove camera cover by squeezing

the back and front of the cover (as

indic

ated by the arrow indicators) at

the same time and lifting it up and

away from the lens.

3.Press and hold the black reset

button for 5 seconds then release the

tton to reset the camera to factory

defaults.

4.Re-att

ach the camera cover, using

the thumb screw as a guide, until it

snaps into place.

Reset