Instruction manual

26
Web Configuration
3. Under Download unsigned ActiveX controls, click Prompt
(recommended) or Enable.
4. Cl
ick OK. Click OK again to save changes.
Step 2 of 2: Log into camera:
1. Connect the c
amera to your local network and find the camera’s IP
address. See “6. Finding the Camera’s IP Address” on page 14.
2. Ent
er the camera’s IP address in the address bar in the following format:
NOTE: Y
ou can also connect to the camera using a DDNS address (DDNS
setup and port forwarding required; see “7. Configuring Remote
Connection” on page 18 for details).
3. Under User Name and Pa
ssword, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
Select Enable or Prompt under
Download unsigned ActiveX controls
Click OK
http://192.168.0.120:80
IP address
Colon
HTTP port number
http://
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login