Instruction manual

21
Configuring Remote Connection
5. Your Account information will be sent to you at the email address you
used in Step 2. Record your Account Information below.
Step 5 of 6: Enable DDNS on the camera:
1. Ent
er the camera’s IP address in your web browser. Log in and then click
Network Service>DDNS.
2. Check Enabl
e DDNS.
3. Configur
e the following:
• Pr
ovider: Select digimerge_ddns.
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account
(e.g.
tomsmith.digimerge.net ).
• User Name: Enter the User Name you received in the confirmation email.
• Password: Enter the Password you received in the confirmation email.
4. Cl
ick OK to save settings.
Step 6 of 6: Connect to the camera’s DDNS address:
1. Ent
er the camera’s DDNS address in your web browser in the following
format:
2. Under User Name and Pa
ssword, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
Once you have logged into your system using your DDNS address, you can
connect to the IP camera from a remote location using a web browser,
Syncro-V, or other VMS software.
Domain Name:
User Name:
Password:
http://tomsmith.digimerge.net:80
DDNS address
Colon
HTTP port number
http://