Instruction manual

10
Camera Installation
6a. Adjust camera viewing angle and secure into
place by tightening thumb screw using a flat head
sc
rewdriver.
6b. Adjust zoom and focus as required.
NOTE: Lens adjus
tment levers are by default
in the locked position. Turn counterclockwise
to unlock. Tighten levers to secure lens
setting.
6c. (Optional) Insert a micr
oSD card into the
camera. To enable recording, you must
format the microSD card and configure
microSD recording (see “8.9.1 Record
Directory” on page 43).
NOTE: The c
amera supports microSD cards
up to a maximum size of 64GB. SanDisk™ or
Kingston™ brand microSD cards are
recommended.
6d. Re-att
ach the camera cover, using the
thumb screw as a guide, until it snaps into
place.
Thumb Screw
6a
Avoid pointing the camera lens in
angles where the IR LEDs are
blocked by the camera cover or dome
cover. If IR LEDs are blocked, it may
result in an unclear nighttime image.
6b
6c
microSD card