Manualshelf

Instruction manual

ManualsBrandsDigimerge ManualsComputer equipmentDNV14TL2
11121314151617181920
6
Connection
2. CONNECTION
The camera has the following termination cables:
1. RJ45 Network Interface: Connect t
o a router or switch on your network
using RJ45 Ethernet cable (Cat5e or better). 100Mhz connection. PoE
supported (class 3 PoE switch required).
NOTE: Use the included R
J45 coupler to connect to male end of RJ45
Ethernet cable.
2. Audio Input (RCA): Connect t
o a self-powered microphone for listen-in
audio.
3. Audio Output (RCA): Connect t
o an amplifier or self-powered speaker for
intercom/2-way audio.
4. DC12V (1A): 12V DC po
wer input terminal. Make sure to follow correct
polarity (+/-) marked on the power connector when connecting to power.
• Minimum P
ower Requirement: 550mA / 6.6W.