Instruction manual

Mobile Connectivity

Note

Your cameras must have motion detection activated to receive push notifications. For details on enabling

motion detection, see 14.2.14 Motion, page 38.

To enable Push Notifications:

1. From live view, tap

then .

2. Tap Alarm Push.

3. Set the slider to ON next to the system you would like to configure.

4. Tap Motion Detect then check each channel you would like to receive push notifica-

tions from.

5. Tap OK. A test notification will be sent to your device. After this, whenever the selected

cameras detect motion, you will receive a notification.

#; r. 1.0/11603/11605; en-US