Instruction manual

Mobile Connectivity

To enable Push Notifications:

1. From the Main menu, tap Push Config.

Note

If Push Config is not shown, tap Add, check Push Config, and then return to the Main Menu.

2. For the system you would like to configure, set the slider to ON.

3. Tap Motion Detect and then check each channel you would like to receive push notifi-

cations from.

4. Tap OK. A test notification will be sent to your device. After this, whenever the selected

cameras detect motion, you will receive a notification.

Note

You can see a list of notifications through the Event List menu. To show the Event List menu, tap Add and

check Event List. Return to the Main Menu and select Event List. Tap on events to view live video from

the camera.

#; r. 1.0/11603/11605; en-US