Instruction manual

FLIR SyncroIP NVR CMS Central Management Software
15
3. Under New Password and Confirm Password, enter the new password.
4. Click OK.
15.11 Adding User Accounts to the CMS
You can create multiple user accounts to the CMS with varying levels of access to the sys-
tem. These user accounts are only used for access to the CMS software and are separate
from the passwords on the individual NVR or IP camera systems.
Note
To make sure users must enter their user name and password to access the CMS, you must make sure
Verify User is checked and Auto Login is unchecked in Config>Options. For details, .
To add a user account to the CMS:
1. Click Config Manager>User Manage.
2. Click Add.
3. Configure the following:
• User: Enter the user name for the account.
• Password/Confirm: Enter the password for the account.
• Name/Sex/Information: (Optional) Enter descriptive details about the user
account.
• Right: Check the permissions that will apply to the user account.
4. Click Save. Click OK to save changes.
15.12 Multi-Monitor Support
The CMS supports up to 4 monitors on a single system. The recommended system speci-
fications are listed below. If your system does not meet the requirements below, you may
experience slow system performance.
#; r. 1.0/11603/11605; en-US
70