Instruction manual

FLIR SyncroIP NVR CMS Central Management Software
15
3. Configure the following:
• Check Search
• Under Device, select the system and channel you would like to search.
• Enter the Start time and the End time for the search.
• Click Search.
4. Click Search. A list of relevant alarms appears below.
15.7 Using Playback Mode
You can view recorded footage from your systems in the CMS software.
To use playback mode:
1. Click Playback (
).
2. Under Device, select the system and channel you would like to search.
• Check Multiple channel to playback video from multiple cameras. Select camera
and then click Add. Repeat to add additional cameras.
3. Under Parameter, select the start and end time for the search.
4. Click Search.
#; r. 1.0/11603/11605; en-US
61