Instruction manual

FLIR SyncroIP NVR CMS Central Management Software
15
3. Configure the following:
1
2
3
4
5
6
7
3.1. Title: Enter a name for your system of your choice (e.g. home or office).
3.2. Type: Select NVR for NVRs or IP Camera for IP cameras.
3.3. Add Type: Select Domain Name for NVRs or Single Device for IP cameras.
3.4. Domain Name: Enter the Domain Name from the confirmation email after your
registered for DDNS, followed by .myddns-flir.com.
3.5. Port: Enter the Client Port (default: 35000).
3.6. User: Enter the system’s user name (default for this system:admin).
3.7. Password: Enter the system’s password (default for this system: 000000).
4. Click Add, then click OK.
5. Click Device List.
6. Click + next to No Group.
7. Perform the following steps to open the NVR:
7.1. Click + next to No Group.
7.2. Double-click the NVR or IP camera.
7.3. Click-and-drag the NVR or IP camera to the display area to view.
1
2
3
#; r. 1.0/11603/11605; en-US
58