Instruction manual

FLIR SyncroIP NVR CMS Central Management Software
15
4. Enter the system’s user name and password (default user name for this system is ad-
minand default password is 000000) and click OK.
5. Click OK.
6. Click Device List.
7. Perform the following steps to open the NVR or IP camera:
1
2
3
7.1. Click + next to No Group.
7.2. Double-click the NVR or IP camera.
7.3. Click-and-drag the NVR or IP camera to the display area to view.
15.5 Adding a NVR or IP Camera Using a DDNS Address
If you have systems with DDNS set up, you can add them to the CMS.
Prerequisites:
• Create a DDNS account. For details, 20 Setting Up DDNS Service, page 111.
• Enter the DDNS information into the NVR or IP camera locally.
• Port forward the Client and HTTP ports (default: ports 80 and 35000) on the router.
#; r. 1.0/11603/11605; en-US
56