Instruction manual

FLIR SyncroIP NVR CMS Central Management Software
15
Note
The CMS default User Name is admin and the Password is admin.
15.4 Adding a NVR or IP Camera from the Local Area Network (LAN)
Once you open the software, you can add a NVR or IP camera.
Prerequisites:
• Connect the NVR or IP camera to a router or switch on the network.
• Install the CMS on a computer in the same LAN as the NVR or IP camera.
To add a NVR or IP camera:
1. Click Config Manager>Device Manage.
2. Click Search Device. If a Windows Firewall alert appears, click Allow.
3. Check the NVR or IP camera and click Add Management.
#; r. 1.0/11603/11605; en-US
55