Instruction manual

Using the Main Menu14

To configure system error actions:

1. Under Event Type, select one of the following system errors to configure: No Disk,

Disk Error, Disk No Space, Net Disconnection, IP Conflicted, or MAC Conflicted.

2. Check Enable to enable warnings for the selected Event Type.

3. Configure the following actions that will be taken when errors occur:

• Show Message: Check to show pop-up window with information related to the

error.

• Send Email: Check to enable email message. You must configure email alerts be-

fore you will be able to receive them.

• Buzzer: Check to enable system buzzer.

4. Click Save to save changes.

14.4.6 Record

The Record menu is used control manual recording for connected cameras.

The Record menu is divided into the following sections:

• The Record Mode section defines settings for the main (high quality) recording stream.

• The Substream section defines settings for an optional lower quality recording stream.

This is useful because you can record the substream to the hard drive and stream it for

playback to remote devices. This saves bandwidth during remote playback.

Note

Enabling Substream Recording is required to use playback mode on a smartphone or tablet. Sub-

stream Recording will increase the amount of disk space required for recording.

To configure manual recording:

1. Right-click in live view and select Record. Log in if prompted.

Click Main Menu>Advanced>Record. Log in if prompted.

2. Under Record Mode, select the main stream recording option under each camera or

under All to configure all cameras:

• Schedule: Camera will record according to settings configured in the schedule.

• Manual: When selected, the camera will use continuous recording.

• Stop: When selected, the camera will not record.

3. Under Substream, configure recording options for the substream.

4. Click OK to save changes.

#; r. 1.0/11603/11605; en-US