Instruction manual

Using the Main Menu14
To manually add a camera to the NVR:
1. Click Manual Add. Configure the following:
• IP Address: Enter the IP address of your IP camera.
• Manufacturer: Select the manufacturer of your IP camera.
• User: Enter the camera’s user name.
• Password: Enter the camera’s password.
• RTSP Port: Enter the camera’s RTSP Port.
• HTTP Port: Enter the camera’s HTTP Port.
Note
See the manufacturer’s user manual for your IP camera for the default user name, password, etc.
2. Click OK. Click OK again to save changes.
14.3.3 Editing Cameras
If the Status indicator on cameras connected to the NVR via PoE or LAN is red or if you
change the connection details for your IP cameras, you will need to update this
information.
To edit cameras:
1. Click
next to the camera you would like to edit.
2. Configure the connection information as needed.
3. Click OK. Click OK again to save changes.
14.3.4 Deleting Cameras
• Click
next to the camera you would like to delete.
#; r. 1.0/11603/11605; en-US
43