Instruction manual

Using the Main Menu14

6. If the Status indicator is red, click . Update the following information, as needed.

• Manufacturer: Select the manufacturer of your IP camera.

• User: Enter the camera’s user name.

• Password: Enter the camera’s password.

• RTSP Port: Enter the camera’s RTSP Port.

• HTTP Port: Enter the camera’s HTTP Port.

Note

See the manufacturer’s user manual for your IP camera for the default user name, password, etc.

7. Click OK. Click OK again to save changes.

14.3.2 Manual Add

If the IP address of your IP camera does not appear when you run IP search, ensure that

the camera is connected to the same LAN as the NVR or is connected to the PoE Ports.

You may attempt to manually connect IP cameras using Manual Add.

#; r. 1.0/11603/11605; en-US