Instruction manual

Using the Main Menu14

To configure switch settings:

1. Click Network Setting.

2. Double-click Switch Settings.

3. Configure the IP Address, Subnet Mask, and Gateway for the internal PoE switch.

4. Click OK. Click Save to save changes. The system will restart.

14.2.14 Motion

The Motion sub-menu allows you to configure settings for motion detection.

14.2.15 Configuring Motion Detection Events

Motion Detection events allow the system to mark footage that has motion. This allows

you to quickly locate relevant footage through Search. You can also configure system re-

sponses to motion detection events, such as activating the system buzzer or sending an

email alert.

To configure Motion Detection events:

CAUTION

Using the Copy button in the Motion menu will copy all settings, including the Record Channel setting.

This means that motion detection may not trigger the correct channel to record.

1. Under Event Type, select Motion Detect.

2. Under Channel, select the channel you would like to configure.

3. Check Enable to enable motion detection on the selected channel.

4. Click Select next to Region to configure which areas of the image will be enabled for

motion detection. A grid will appear over the camera’s live view.

Motion Grid

Areas enabled for motion detection are shown in red and areas that are disabled are transparent. Click

and drag to enable or disable areas for motion detection. Right-click when finished.

#; r. 1.0/11603/11605; en-US