Instruction manual

Using the Main Menu14
14.2.10 Configuring DDNS
The DDNS Setup window allows you to enter your FLIR DDNS settings in the NVR. This
step is required for remote access.
Prerequisites:
• Create a DDNS account. For details, “Appendix D: Setting Up DDNS Service” on
page 98.
• Port forward ports on your router to NVR’s IP address (by default, ports 35000 and 80).
• Have your DDNS account name, password, and domain name ready.
To configure DDNS settings:
1. Click Network Setting.
2. Check DDNS.
3. Double-click DDNS.
4. Ensure Enable is checked. The box will be white when DDNS is enabled.
5. Under Domain Name, enter the Domain Name from the confirmation email you re-
ceived after registering for DDNS.
6. Under User ID, enter the User Name from the confirmation email.
7. Under Password, enter the Password from the confirmation email.
8. Click OK.
9. Click OK.
10. Click Save.
14.2.11 Connecting to your system
After you have port forwarded the required port, created a DDNS account, and enabled
DDNS on your system, you must enter the DDNS URL into Internet Explorer to access
your NVR.
The DDNS URL must include http:// , the name of your DDNS URL, followed by a colon,
then the HTTP port of your NVR.
For example:
http://tomsmith.myddns-flir.com:80
Note
If you change your HTTP port number (port 80) to a different port, you must enter your port number after
the DDNS address
#; r. 1.0/11603/11605; en-US
35