Instruction manual

Using the Main Menu14

Note

Click OK when finished making changes.

14.2.2 Recording

The Recording sub-menu allows you to configure image quality settings for the recording

stream and sub-stream (used during remote connection). Settings for the recording

stream are shown on the left, and sub-stream settings are shown on the right.

To configure recording quality settings:

1. Under Channel, select the channel you would like to configure.

2. Under Resolution, select the resolution for the selected recording type. Settings avail-

able depend on the model of IP camera connected.

3. Under Frame Rate, select the frame rate for the selected recording type on the left.

Select the frame rate for the sub-stream on the right.

4. Under Bit Rate Type, select CBR (Constant Bit Rate) or VBR (Variable Bit Rate) for

the selected recording type on the left and sub-stream on the right. If you select VBR,

select the Quality from 1 (lowest) to 6 (highest).

5. Under Bit Rate (Kb/S), select the bit rate for the selected recording type on the left

and the sub-stream on the right.

6. Under Audio/Video, check the box on the left to enable audio recording (camera must

have microphone attached). Check the box in the middle to enable audio streaming to

remote users. Check the box on the far right to enable video streaming to remote users

(un-check to hide the channel from remote users.

7. (Optional) To copy settings to other channels, click Copy, select channels to apply set-

tings to, and click OK.

8. Click OK to save changes.

#; r. 1.0/11603/11605; en-US