Instruction manual

Recording

By default, the system is set to immediately record at startup from connected cameras.

This is called Continuous Recording. It is highly recommended to keep Continuous Re-

cording on at all times.

The system supports the following recording types:

• Continuous Recording: By default, all camera channels are enabled with Continuous

Recording. During Continuous Recording, the Record icon (

) appears in the

channel.

• Motion Recording: Cameras can be configured to record and mark events when mo-

tion is detected. When motion is detected, the Motion icon (

) appears in the

channel.

Note

You must enable motion recording in the Schedule before the system will record motion events. For

details, see 14.2.3 Schedule, page 32.

• Alarm Recording: Cameras can be configured to record when external alarm devices

are triggered.

#; r. 1.0/11603/11605; en-US