Instruction manual

Setting The Time
10
CAUTION
It is highly recommended to set the time on the system prior to doing any recording.
To set the date and time:
1. In the main viewing mode, right-click and click Main Menu. Log into the system using
the admin account (default user name is admin and password is 000000).
2. Click Setting>General.
3. Enter the current date (MM DD YYYY) and time (HH MM SS) under System Time.
4. Click Save.
Note
To configure Daylight Savings Time see 14.2.1 General, page 30 . To configure NTP, see 14.2.9 Con-
figuring NTP, page 34.
#; r. 1.0/11603/11605; en-US
17