Instruction manual

Using the System

The Quick Menu has the following options:

• View: Select a camera in full-screen or select a multi-channel display.

• Pan/Tilt/Zoom: Access controls for PTZ cameras (not included).

• AutoFocus: If your camera has a mechanical focus lens, click to configure the zoom/fo-

cus levels or activate auto focus. See 9.7 Adjusting Camera Zoom & Focus, page 16.

• Color Setting: Configure color settings for IP cameras.

• Search: Search/playback recorded video. See 12 Search (Playback), page 19.

• Record: Open the Record menu to select manual recording options. See 14.4.6 Re-

cord, page 47.

• Device Search: Open the Device Search menu to manage IP cameras.

• Alarm Output: Open the Alarm Output menu.

• Main Menu: Open the Main Menu. See 14 Using the Main Menu, page 26.

9.3 Adjusting Color Settings

Use the Color Settings menu to adjust color settings for your IP cameras.

To adjust color settings:

1. Right-click on the channel you would like to configure and select Color Setting. Enter

the system password if prompted.

2. Adjust the Hue, Brightness, Contrast, and Saturation settings that the camera will

use. To enable custom Gain controls, check Gain and use the slider to configure the

gain level.

Use Color mode to select a preset color profile.

Note

• Color settings will update once you save changes.

• To configure the Customized1~4 profiles, click Customized.

#; r. 1.0/11603/11605; en-US