Instruction manual

DNR300 Series Basic Setup
4
5. Connect the Power Adapters
5.1. Connect the DC 12V power supply to the DC 12V port on the rear panel of the
system. Connect the power cable to an outlet, power strip, or surge protector.
This power adapter is used to power the main unit.
5.2. Connect the DC 48V power supply to the DC 48V port on the rear panel of the
system. Connect the power cable to an outlet, power strip, or surge protector.
This power adapter is used to power the integrated PoE ports.
5.3. Turn the power switch to the ON position.
00
ON
#; r. 1.0/11603/11605; en-US
7