Instruction manual

DNR300 Series Basic Setup

1. Connect the Cameras

• Connect IP cameras to PoE (Power over Ethernet) Ports.

• Connect IP cameras to the same LAN as the NVR. For details on connecting IP

cameras over the LAN, see 14.3 Device Search, page 41.

2. Connect a Monitor

• Connect an HDMI cable (not included) from the HDMI port on the rear panel to an

HDTV or HDMI monitor.

• Connect a VGA cable (not included) from the VGA port to the VGA port on your

monitor.

• Connect a BNC terminated cable (not included) from the Video OUT port to a TV or

CCTV monitor.

3. Connect the Mouse

• Connect the mouse (included) to the USB mouse port on the front or rear panel.

4. Connect the Ethernet Cable

• Connect an Ethernet cable (not included) to the LAN port on the rear panel of sys-

tem; connect the other end of the Ethernet cable to an empty LAN port on your

router or switch (not included).

#; r. 1.0/11603/11605; en-US