Instruction manual

DNR300 Series System
Specifications
25
25.1 System
Main Processor Dual-core embedded processor
Operating
System
Embedded LINUX
Pentaplex
Operation
Simultaneous View, Record, Playback, Backup, and Remote Monitoring
25.2 Inputs/Outputs
IP Camera Input 8 channel / 16 channel
Power over
Ethernet (PoE)
8 integrated PoE ports
Audio 1 channel input (BNC), 1 channel output (BNC)
PTZ RS-485, supports Pelco-D and Pelco-P
USB
2 ports
Alarm Input
8 Channel
Relay Out 3 Channel
25.3 Display
Interface 1 HDMI, 1 VGA, 1 BNC
Resolution 1920×1080, 1280×1024, 1280×720, 1024×768
Display Split 1/4/8/9, 1/4/8/9/16
OSD Camera Title, Time, Camera Lock, Motion Detection, Recording Status
25.4 Recording
Compression
H.264
Resolution
1080P (1920×1080) / 720P (1280×720)
Record Rate
240FPS @ 1080P / 480FPS @ 1080P
Bit Rate 160Mbps
Record Mode High Quality Stream/Sub-Stream Recording: Manual, Schedule, Motion Detection,
Alarm
Record Interval 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec
25.5 Video Detection and Alarm
Trigger Events Recording, PTZ, Tour, Alarm, Video Push, Email, FTP, Buzzer & Screen tips
Video Detection Motion Detection
25.6 Playback and Backup
Sync Playback 1/4/8, 1/4/8/16
Playback
Function
8 Channel / 16 Channel
Backup Mode
USB Device / Network
Configuration
Backup
To USB Device
#; r. 1.0/11603/11605; en-US
124