Manualshelf

Instruction manual

ManualsBrandsDigimerge ManualsComputer equipmentDNR300 Series
121122123124125126127128129130
DNR300 Series Hard Drive Installation
22
3. Remove the SATA power and data cables from the hard drive.
4. Turn the unit over and loosen the hard drive screws. Do not remove the hard drive
screws.
5. Turn the unit back over and remove the hard drive from the case.
6. Remove the hard drive screws from the hard drive.
7. Replace the cover and cover screws. Make sure to slide the lip on the cover under the
bottom of the front panel.
22.3 Formatting Hard Drives
You must format hard drives before you may use them with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone. System settings will
not be erased.
To format a hard drive:
1. From Live View, right-click and select Main Menu>Advanced>HDD Management.
#; r. 1.0/11603/11605; en-US
119