Instruction manual

Setting Up DDNS Service
20
6. Configure the following:
2
3
4
1
6.1. Ensure Enable is checked. The checkbox will be white when DDNS is enabled.
6.2. Under Domain Name, enter the Domain Name from the confirmation email you
received after registering for DDNS.
6.3. Under User ID, enter the User Name from the confirmation email.
6.4. Under Password, enter the Password from the confirmation email.
7. Click OK.
8. Click Save.
Note
It may take between 10~15 minutes for the DDNS server to update with your new DDNS address.
20.3 Connecting to your system using DDNS
Note
You must port forward ports on your router to NVR’s IP address (by default, ports 35000 and 80) to con-
nect to your system over the Internet.
Now that you have set up your system for DDNS, use the following address formats to
connect:
20.3.1 CMS Software or Mobile Apps
Example DDNS address to connect using CMS or app
tomsmith.myddns-flir.com
• For details on the CMS Software, 15 FLIR SyncroIP NVR CMS Central Management
Software, page 54.
• For details on mobile apps, 17 Mobile Connectivity, page 77.
20.3.2 Internet Explorer
Example DDNS address to connect using IE
http://tomsmith.myddns-flir.com:80
• For details, 16 Remote Viewing On Internet Explorer, page 73.
#; r. 1.0/11603/11605; en-US
113