Instruction manual

Auto Port Forwarding Wizard19
19.2.4 Step 2: Enter your Router Settings
0
1
2
3
4 5
1. Under the Router drop-down list, select the model of your router.
• Click the Search button (
) to enter the name of your router model.
Note
You can click the Auto Detect button (
) if you have a Linksys or Netgear router (works with
most Linksys or Netgear models).
2. Under Router IP, click the Detect Router IP button ( ).
• The router’s IP populates in the blank field. Click OK to exit the prompt.
3. Under Username and Password, enter the router’s username and password.
Note
The HTTP Type (default http://) and HTTP Port fields refer to the port and protocol used to access
your router’s configuration web page. You may need to change the values depending on your router
model. Consult your router manual for details.
4. Under IP, enter the IP address of your device.
Note
The IP is usually found in the information window of your system.
5. Under Port, enter the system’s HTTP Port (by default, port 80).
Under 2nd Port, enter the system’s Client Port (by default, port 35000).
6. Click Next to continue.
#; r. 1.0/11603/11605; en-US
108