Instruction manual

55
FLIR SyncroIP NVR Central Management Software
To change the CMS admin password:
1. When logged in as the admin account, click Config(
)>Modify Password.
2. Under Old P
assword, enter the old password.
3. Under New P
assword and Confirm Password, enter the new password.
Enter old password
Enter new password
4. Click OK.
Adding User Accounts to the CMS
You can create multiple user accounts to the CMS with varying levels of access to the system.
These user accounts are only used for access to the CMS software and are separate from the
passwords on the individual NVR systems.
NOTE: To make sure users must enter their user name and password to access the CMS, you
mus
t make sure Verify User is checked and Auto Login is unchecked in Config>Options. For
details, see “Configuring CMS Options” on page 53.
To add a user account to the CMS:
1. Click Config Manager>User
Manage.
2.
Click Add.
Click Add
3. Configure the following:
• User: En
ter the user name for the account.
• Password/Confirm: Enter the password for the account.
• Name/Sex/Information: (Optional) Enter descriptive details about the user account.
• Right: Check the permissions that will apply to the user account.
4. Click Save. Cl
ick OK to save changes.