Instruction manual

37
Using the Main Menu
To configure Auto Maintain settings:
1. Under Auto-Reboot S
ystem, select the day
of the week you would like the system to
reboot on, select Everyday to reboot the
system everyday, or select Never to
disable auto-rebooting. On the right, select
the time of day you would like the system
to reboot.
2. Under Auto-Del
ete Old Files, select Never
to disable auto-deleting of old recordings
or select Customized to enable
auto-deleting.
• If you select Customized, enter the number
of days
the system will retain recordings.
NOTE: The
system must have sufficient
storage space to keep recordings for the
specified duration.
3. Click OK t
o save changes.
Config Backup
The Config Backup sub-menu allows you to
export your system configuration to a USB
flash drive (not included) or to import a saved
configuration. You can import a saved
configuration from another NVR of the same
model and channel configuration.
To export the system configuration
to a USB
flash drive:
1. Insert a USB flash drive into one of the
USB ports
on the system.
2. Right-click and select Main
Menu>Adv
anced>Config Backup.
3. Check the USB flash drive you would like
to
export to in the list.
4. Click Export.
To import a saved system configuration:
1. Insert a USB flash drive with a saved
sys
tem configuration into one of the USB
ports on the system.
2. Right-click and select Mai
n
Menu>Advanced>Config Backup.
3. Check the USB flash drive with the saved
sys
tem configuration file.
4. Click Import.
5. Click OK. The
system will restart.