Instruction manual

30
Using the Main Menu
• Image Enhance: Check for the NVR to
digitally improve the video quality on the
live display. This setting does not affect
recordings.
• Enable Sequence: Check to enable
Sequence mode. When Sequence mode is
activated, the system will cycle through
enabled views and a (arrows) icon is shown
on screen. You can click this icon to pause
Sequence mode.
• View 1/View 4/View 8: Check to enable
views to be shown in Sequence mode. View
1 allows you to enable/disable specific
channels in Sequence mode. Other View
options allow you to enable/disable views
based on pages. On 8-channel models for
example, View 4 #1 represents channels
1~4 and #2 represents channels 4~8.
NOTE: Available options depend on the
number of channels your NVR has.
• Dwel
l: Enter the Dwell time in seconds.
The Dwell time is the amount of time views
are shown on screen before changing in
Sequence mode.
• Motion Sequence Type: Select the view
type that will be viewed when motion is
detected.
2. Click Sav
e to save changes.
Default
The Default sub-menu allows you to reset the
system to factory default settings.
NOTE: Resett
ing to factory defaults does not
reset user accounts or passwords.
To reset the system to factory default
settings:
1. Check the settings you would like to reset
t
o default settings.
2. Click OK.