Instruction manual

26
Using the Main Menu
You must port forward the TCP (Client) Port
and HTTP Ports to enable remote access to
the system.
To configure ports:
1. Configure the TCP
Port (Client), HTTP
Port, UDP Port, and RTSP Port fields as
needed.
NOTE: Please note that if the HTTP is port
is anything other than 80, y
ou must enter
http:// before the camera’s IP address and
colon (:) and the HTTP port after the IP
address when connecting using an Internet
browser (e.g. if the HTTP port is
85 , enter
http://192.168.x.x:85 ).
2. Click Save. The sys
tem will restart to
update the ports used.
Configuring NTP
You can sync the system clock with an Internet
NTP time server.
To sync the system with a time server:
1. Click Netw
ork Sett
ing.
2. Check NTP.
3. Double-click NTP to
open the
configuration menu.
4. Configure the following:
• Under Server IP, ent
er the IP or DNS
address of the NTP server.
• Under Port, enter the NTP server port
number.
• Under Time Zone, select your time zone.
• Under Update Period, enter the interval
your system will sync the time with the
selected server.
TIP: Clic
k Manual Update
to test the server
settings entered and manually sync the system
time.
5. Click OK. C
l
ick Save to save your changes.
Configuring DDNS
The DDNS Setup window allows you to enter
your FLIR DDNS settings in the NVR. This step
is required for remote access.
Prerequisites:
• Create a DDNS account. For details,
“
A
ppendix D: Setting Up DDNS Service” on
page 98.
• Port forward ports on your router to NVR’s
IP address (by default, ports 35000 and 80).
• Have your DDNS account name, password,
and domain name ready.
To configure DDNS settings:
1. Click Network Sett
ing.
2. Check DDNS.
3.
Double-click DDNS.
4.
Ensure Enab
le is checked. The box will be
white when DDNS is enabled.
5. Under Domain Name, ent
er the Domain
Name from the confirmation email you
received after registering for DDNS.
6. Under User
ID, enter the User Name from
the confirmation email.
7. Under Passw
ord, enter the Password
from the confirmation email.
8. Click OK.
9. Click OK.
10. Click Save.