Instruction manual

25
Using the Main Menu
channels you would like to copy to and
click OK.
5. Click OK to
save changes.
Configuring Pre-Recording and Mirror
Recording
Pre-recording determines the amount of time
the system will record before events.
Mirroring allows the camera to record
simultaneously to a secondary mirror hard
drive and primary recording hard drive.
NOTE: Sec
ondary hard drive must be
ins
talled and configured to use mirror
recording function.
To configure pre-recording and mirror
recording:
1. Under Channel, sel
ect the
camera you
would like to configure or select All.
2. Under PreRec
ord, select the duration for
pre-recording.
3. Check Mirr
oring to enable mirror
recording for the selected channel.
4. Click OK to
save settings.
Configuring Holidays
Holiday settings allow you to configure a
special recording schedule on certain days.
To configure holidays:
1. Check the checkbox next to Holidays
Sett
ing to enable holidays.
2. Click Holidays Sett
ing.
3. Click days in the calendar to enable them
as holidays. Selected holidays are
highlighted in blue.
4. Click OK. Clic
k OK to save changes.
Network
The Network sub-menu allows you to
configure network settings.
Configuring DHCP or Fixed IP Address
1. From live view, right-click and select Main
Menu. Login if prompted.
2. Click Setting>Network.
3. Check DHCP to
use DHCP or un-check to
use a static IP address. If you un-check
DHCP, configure the following:
• IP Address
• Subnet
Mask
• Gateway
• Preferred DNS
• Alternate DNS
4. Click Save
to save your changes. Restart
the system to update the IP address.
Configuring System Ports
The system uses the following ports:
• TCP Port (Client Port): Used
for remote
video streaming to computers and mobile
devices. The default port number is 35000.
• HTTP Port: Used to enable connection to
the system’s web browser interface. The
default port number is 80.
• UDP Port: Used for special applications.
The default port number is 35001.
• RTSP Port: Used for special applications.
The default port number is 554.