Instruction manual

23
Using the Main Menu
Setting
The Setting menu allows you to
configure general system, schedule,
network, recording, display, and
motion settings. It also allows you to restore
the system to factory defaults.
General
The General sub-menu allows you to configure
the time and general system settings.
The General sub-menu contains the following
opti
ons:
• Sys
tem Time: Select the current date and
time and click Save to save changes.
• Date Format: Select the date format (YYYY
MM DD, MM DD YYYY, or DD MM YYYY).
• Date Separator: Select if you would like a
dot (.), dash (-), or slash (/) to separate the
date display.
• DST: Check to enable daylight savings time
adjustments. To configure the start and end
times for daylight savings, click Set. Then,
configure the Start and End as needed, and
click OK.
• Time Format: Select 24-HOUR or
12-HOUR.
• Language: Select the system language.
• Video Standard: Select NTSC (North
America) or PAL (Europe).
• Device No.: Select the remote control ID
for the NVR.
• Device ID: Enter a custom name for the
NVR.
• HDD Full: Select Overwrite for the system
to begin overwriting the oldest recordings
when the hard drive is full or select Stop
Recording for the system to stop recording
when the hard drive is full.
• Pack Duration: Enter the desired pack
duration. The pack duration determines
the duration of video files saved to the
system.
• Realtime Play: Select the duration of
videos that will be played back in Quick
Playback mode. For example, if Realtime
Play is set to 5 minutes, Quick Playback will
start playing back video recorded from 5
minutes ago on the selected channel.
• Mouse Property: Click MouseSet, adjust
the double-click speed and click OK.
• Startup Wizard: Check to enabl
e the
Startup Wizard when your system starts. It
is recommended to disable Startup Wizard
once you have configured the system.
• Navigation: Check to enable the System
Toolbar that appears when left clicking on
the screen.
• Auto Logout: Enter the amount of time the
system will wait before logging a user out
when idle.
• IPC Time Sync: The NVR will regularly sync
the internal clocks of connected IP
cameras. Enter the interval between time
syncs.
NOTE: Cl
ick OK when finished making
changes.