Instruction manual
Table Of Contents
- Getting Started
- Basic Setup
- Front Panel
- Rear Panel
- Remote Control
- Using the System
- Setting the Time
- Recording
- Search (Playback)
- Backup
- Using the Main Menu
- FLIR SyncroIP NVR Central Management Software
- System Requirements
- Prerequisites
- Installing FLIR SyncroIP NVR CMS
- Adding a NVR from the Local Area Network (LAN)
- Adding a NVR using a DDNS address
- Using Alarm Rec (Event Search)
- Using Playback Mode
- Configuring Monitoring Tasks and Projects
- Using E-Map
- Configuring the CMS
- Adding User Accounts to the CMS
- Multi-Monitor Support
- Remote Viewing on Internet Explorer
- Mobile Connectivity
- Appendix A: System Specifications
- Appendix B: Setting up Remote Viewing
- Appendix C: Auto Port Forwarding Wizard
- Appendix D: Setting Up DDNS Service
- Appendix E: Remote Firmware Upgrade
- Appendix F: Hard Drive Installation
- Appendix G: Connecting an External Monitor
- Troubleshooting
14
Search (Playback)
SEARCH (PLAYBACK)
Search mode is used to navigate and playback recorded video files on the NVR.
Playing Back Video from the Hard Drive
1. From live view, right-click and then click Search. If needed, log in using the admin account
(default User Name is admin and default Password is 000000).
2. Use the calendar on the right to select the day to playback.
3. Use the drop-down menus to select the channels you would lik
e to playback. Click the display
options (
) to playback multiple channels simultaneously.
4. Click inside the video bar to select the playback time. Th
e system will begin playing back at
the selected time.
Select the day to playback
Select channels to playback
Click inside the bar to select a playback time