Instruction manual

96
Appendix C: Auto Port Forwarding Wizard
• The "Possible 2nd Router" refers to the router immediate to the internet connection. This is
the router that requires you to configure a DMZ host connection.
Scenario A: Router/Modem Combination + Router
• You may have a router/modem combination, with a second router in your network.
Scenario B: Multiple Routers
Internet
Router 2
Router 1
NVR System
Computer
DMZ IP
Modem
Port Forward port 80 &
35000 to Router 1
IP Address: 192.168.1.100
(Assigned by Router 2)
Enter 192.168.1.100 into the DMZ
Host IP section into Router 2
EXAMPLE
• You may have two routers in your network.
In both scenarios, the router that is immediate to the internet connection (Router 2 in illustration)
must act
as a "bridge" to another router (Router 1 in illustration). The Auto Port Forwarding
Wizard must connect to Router 1.
A proper DMZ configuration in Router 2 allows all incoming traffic going through
Router 2 to
automatically pass to Router 1. Router 2 acts as a "dummy" router and passes all the incoming
data onto Router 1. Router 1 is the router that needs the port forwarding information.