Instruction manual

Search and Auto detect
button
Router drop-down list
Router IP
Router user name &
password
Enter ports 80 and
35000
under Ports
Enable Silent Mode
35000
94
Appendix C: Auto Port Forwarding Wizard
2. Under Router IP, click the Detect Router IP button ( ).
• The router’s IP populates in the blank field. Click OK to
exit the prompt.
3. Under User
name and Password, enter the router’s username and password.
• Optional: Under HT
TP Type (default http://) and HTTP Port (default, 80), you may have to
change the values depending on your router model. Consult your router manual for details.
4. Under IP, ente
r the IP address of your device.
NOTE: The IP is usuall
y found in the information window of your NVR.
5. Under Por
t, enter the NVR’s HTTP Port (by default, port 80).
6. Under 2nd P
ort, enter the NVR’s Client Port (by default, port 35000).
7. Click Next to
continue.
Enter your device’s IP
Enter port
numbers
35000