Instruction manual

60
Resetting to Factory Defaults
7. RESETTING TO FACTORY DEFAULTS
Follow the steps below to revert all settings to factory defaults. The camera
must be connected to power to perform a factory reset.
1.
1
Remove the camera cover
screws (2x) and remove the
camera cover.
2. Press and hold the white
r
eset button for 5 seconds
then release the button to
reset the camera to factory
defaults.
Press and hold for 5 seconds to
reset to factory defaults
2
3. Re-attach the camera cover
and replace the camera
cover screws (2x).
NOTE: Make sure rubber seal is
firmly in place when replacing
t
h
e camera cover.