Instruction manual

16
Configuring Remote Connection
5. Your Account information will be sent to you at the email address you
used in Step 2. Record your Account Information below.
Domain Name:
User Name:
Password:
Step 5 of 6: Enable DDNS on the camera:
1. Enter the camera’s IP address in your web browser. Log in and then click
Netw
ork Service>DDNS.
2. Check Enable
DDNS.
3. Configure the f
ollowing:
• Provider: Select
digimerge_ddns.
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account
(e.g.
tomsmith.digimerge.net ).
• User Name: Enter the User Name you received in the confirmation email.
• Password: Enter the Password you received in the confirmation email.
4. Click OK
to save settings.
Step 6 of 6: Connect to the camera’s DDNS address:
1. Ent
er the camera’s DDNS address in your web browser in the following
fo
rmat:
http://tomsmith.digimerge.net:80
DDNS address
Colon
HTTP port number
http://
2. Under User Name and Password, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
Once you have logged into your system using your DDNS address, you can
connect to the IP camera from a remote location using a web browser,
Syncro-V, or other VMS software.