Instruction manual

PROTOCOL PELCO-D : 2400 BPS
PTZ ADDR 001
MON CHAN 001
PRE GRO TOUR SCAN PATT FOCUS ZOOM
SYSTEM CONTROLLER
- 12 -
PASSWORD?
1. NO. 001
2. TYPE PTZ
3. PROTOCOL DRX-502
4. COMM SPEED 2400 BPS
NO. : Select camera address to be changed.
TYPE : Select camera type.
PROTOCOL : Protocol select.
COMM SPEED : Select communication speed
** DRX-502 : 9600 bps
** Pelco D : 2400 bps
5. JOYSTICK PROP
6. EXIT
JOYSITCK: Select the way of Joystick control.
PROP : Proportional speed control.
ON-OFF : Fixed speed control.
EXIT
Accessing the system setup menu
Pressing keypad 1 and then holding the SET key for
approximately 2 seconds.
It provides access to the system setup menu system.
Note: You will be prompted for a password if one has
previously been set
(factory default is “0000”)
ACCKBD2000