Manual

Line Sensor Robotic Development Kit Reference Manual
www.digilentinc.com page 6 of 9
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
9. Connect the two PmodHB5 modules to port JD on the Cerebot MX4cK board using the 2x6
Pin to dual 6 pin cable. Use the marker on the cable connector to ensure that pin placements
are in alignment when connecting the boards.
10. Strip 1/2-inch of insulation from both ends of all red and black 22 gauge power wires.