Owner manual

Remote Control Robotic Development Kit Reference Manual
www.digilentinc.com page 5 of 9
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
8. Compare the Cerebot 32MX4 board to the picture below. Note that the blue shorts are
attached to each jumper as depicted. Remove the rubber feet from the bottom of the corners
of the Cerebot32MX4. Attach the standoffs to the board using the corresponding mounting
screws. Mount the Cerebot 32MX4 board to the top side of the metal platform. Be careful not
to cross thread screws while mounting the Cerebot 32MX4 board.