Owner's manual

PmodRF1 Reference Manual
www.digilentinc.com page 2 of 2
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Connector J1 – SPI Communications
Pin Signal Description
1 SEL Slave Select
2 MOSI Master out/Slave in Data
3 MISO Master in/Slave out Data
4 SCLK Serial Clock
5 GND Power Supply Ground
6 VCC Power Supply (3.3V)
7 IRQ Interrupt Request Signal
8 RST Hardware Reset (Active Low)
9 SLP_TR Multipurpose Control Signal
10 CLKM Clock Output
11 GND Power Supply Ground
12 VCC Power Supply (3.3V)