Manualshelf

Data Sheet

ManualsBrandsDigilent ManualsUltrasonic Range FindersDigilent Pmod MAXSONAR Maxbotix Ultrasonic Range Finder
123
PmodMAXSONAR™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 3 of 3
Pin
Signal
Description
1
AN
Analog Output
2
RX
Receive Data
3
TX
Transmit Data
4
PWM
Pulse-width Modulation
5
GND
Power Supply Ground
6
VCC
Power Supply (3.3V/5V)
Table 1. Pinout description table.
Any external power applied to the PmodMAXSONAR must be within 2.5V and 5.5V; however, it is recommended
that Pmod is operated at 3.3V.
3 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 0.875 inches long on the sides parallel to the pins
on the pin header and 0.8 inches long on the sides perpendicular to the pin header.